Bacharach’s MGS-410 is an economical refrigerant leak detector
Bacharach’s MGS-410 Refrigerant Leak Detectors are typically used in mechanical equipment rooms, freezers and cold rooms down to -40°C.
The MGS-410 Leak Detector can be used as a standalone refrigerant detection system. It can also be connected to the MGS-408 and MGS-402 Leak Detection Controllers or linked to the Building Management System through Modbus communications.
The MGS-410 series offers a variety of pre-calibrated sensor modules that do not require calibration refrigerants. Each sensor targets a different gas including refrigerants, CO2, NH3, O2, CO, combustible gases or NO2. The plug-and-play sensor modules can be quickly and easily exchanged, and no training is needed.
The refrigerant leak detector’s status can be viewed in real-time on the MGS-400 mobile app via Bluetooth. The MSG 410 can be commissioned, configured and maintained on the mobile phone app with ease and without special training or tools.
The sensors can set off the integrated audible and visual alarm to alert personnel of a refrigeration leak.
MGS-400 Series | Gas Detection Product Overview
MGS-400 Series | How to Calibrate - Intuitive Gas Detection
Product Details
-
Key Features
- • MGS-400 mobile app interface (available for Android and iOS) via Bluetooth
- • Modbus communications for integration with Bacharach’s MGS-408 controller or third-party BMS / BAS control systems
- • IP66-rated enclosure protects from dust and water ingress
- • Pre-calibrated sensors
- • Semi-automated calibration
- • Temperature-compensated Measurement
- • Audible and Visual Alarms comply with ASHRAE 15 / EN 378
- • Multiple Cable Entries and Terminals enable quick and easy installation of all wiring; daisy-chain power, and digital communications
- • Suitable for use in cold rooms and freezers down to -40°C
Specifications | |
---|---|
Sensor Channels | 1 |
Measuring Range | Sensor Dependent (See Datasheet) |
Sensitivity/Minimum Detection Limit | Sensor Dependent (See Datasheet) |
Accuracy | SC - < -10%/+15% of Full-Scale |
IR, Cat, EC - < ±5% of Full-Scale | |
Resolution | Sensor & Gas Concentration Dependent (See Datasheet) |
Enclosure Rating | IP66 |
User Interface | MGS 400 Series App |
Power | 19.5 to 28.5 VDC or 24 VAC ±20%; 4W |
Digital Communications | Modbus RTU via RS 485 |
Operating Voltage | 24 VDC |
Alarm: | Integrated Audible / Visual Alarm |
Ambient Temperature | -40 to 122°F (-40 to +50°C) |
Humidity | 5 to 90% RH, non-condensing |
Altitude | 0 to 6,560 ft (2,000 m) |
Status Indicator | Tri-color LED (green, red, orange) |
Buzzer Volume | 80 dB @ 10 cm |
Product Dimensions (L×W×H) | 5.1” × 5.1” × 2.7” (130 × 130 × 68 mm) |
Product Weight | 9.2oz (260 g) |
Sensor Type | Sensor Dependent (See Datasheet) |
Approvals | CE, UL / CSA / IEC EN 61010-1 |
Warranty | 1 Year |
- Resources